The sight of a tree stump on your backyard may not always seem that picturesque & it can also take up valuable space! So it is better to get rid of it, but the stump removal process can be tricky. Cutting the tree down is actually the easier part, removing the stump can be an even more daunting task. But, if proper techniques and methods are applied than the job can become considerably easier. Click here to read more info about tree stumps.
The first part is to decide which stump removal technique should be used and for that the tree stump has to be assessed properly. For example removing deciduous tree stumps can be a lot more demanding when compared to removing pine tree stumps. The age of the stump is another factor which should be considered. Now let’s take a look at the methods which can be used:
Removing the Stump by Hand: This method works best for smaller, older or shallow rooted tress. The tools required are a shovel, an axe or a grub hoe with loppers and a root saw. Use the shovel to dig along the circumference of the stump & try to expose all the larger roots of the tree. Then depending on the size of the exposed roots you can use loppers or a root saw to remove them. An axe can also be used, but it has to be used cautiously. Use the grub hoe to wrench the remaining roots which remain embedded. Now that all the roots have been removed, just finish the job by removing the stump which will not be too difficult. Finally, make sure that you fill the hole with some sawdust or loam. Read more https://training.gov.au/Training/Details/RTF2311A
Grinding the Stump: If you are willing to use a stump grinder than it is probably wise to hire someone who can do the task for you. Put the stump grinder in the right position and turn it on. It will begin from the surface of the stump & will grind its way down towards the ground up to the roots. The grinder should be moved along the circumference of the stump in order to get best results. Make sure to get rid of the ground up wood which will allow the ground to recover quickly & also fill the hole with loam or sawdust.
Burning the Stump: In this method you can make use of the tree that has been chopped as fuel to burn the stump. It can be a great idea if you want to stay warm & if you have some scrap wood which you want to get rid of. Put the wood on top of the stump & also all around the stump. Make sure that the stump remains in the center of the fire. Now, the fire should keep on burning as it may take some hours to finish. After the completion of the burning process take the ash out of the hole & replace it with some sawdust or loam or any other filler element.
Using a Chemical Stump Remover: This method uses a drill to make a series of holes on top of the stump. Try to space the holes evenly. Put the stump remover chemical on those holes .The stump will now begin to get softer & softer. After a few weeks when it becomes soft enough & gets to a stage where it can be uprooted without much effort, it is time to finish the task with an axe or a shovel. In the end, use some filler element like loam to fill the hole so that the ground stays level.
Comments are closed, but trackbacks and pingbacks are open.